Ramset AnkaScrew 6 x 50mm Galvanised Masonry Anchor - Flanged Hex Screw-In - 10 Pack

Questions & Answers

What size hole do I drill for this anchor?

Use a 6mm masonry drill bit. The 6 x 50mm AnkaScrew is matched to a 6mm hole.

What can I fix it into?

It is designed for concrete, brick and block. Drill a clean hole, clear the dust, then drive the anchor in.

Is the anchor removable?

Yes. The screw-in AnkaScrew is fully removable, so you can back it out and relocate or reuse the fixing.

What head does it have?

A flanged hex head, which you drive with a standard socket and which spreads the clamping load.

How many anchors are in the pack?

This pack contains 10 anchors.

Do masonry screws need anchors?

No separate plug is needed. The AnkaScrew is a self-anchoring masonry screw that cuts its own thread directly into the 6mm hole in concrete, brick or block.

How do you attach a sill plate to concrete with these?

Drill a 6mm hole through the sill plate into the slab, clear the dust, then drive the 6 x 50mm AnkaScrew with a socket until the flanged hex head pulls the plate down tight.