
Ramset
The Ramset 10 x 50mm DynaBolt Plus hex nut bolt is a gold passivated, zinc plated masonry sleeve anchor supplied in a 2 pack for fixing into concrete, brick or block. The patented pull-down expansion sleeve closes gaps of up to 5mm between the fixture and the base material.
As a fully assembled through-fixture anchor, it drops straight through the fixture and into the hole, so there is no marking out or repositioning. Tightening the hex nut draws the sleeve down for a firm, gap-closing hold on brackets, rails and fixtures.
Ramset 10 x 50mm DynaBolt Plus Hex Nut Bolt 2 Pack is a masonry anchor designed for use in concrete, brick or block applications. The DynaBolt Plus features a patented pull-down expansion sleeve that effectively closes gaps of up to 5mm.
Drill a 10mm hole through the fixture into the masonry, drop the assembled anchor in, then tighten the hex nut to expand the sleeve.
It closes gaps of up to 5mm between the fixture and the base material as the nut is tightened.
Concrete, brick or block.
The DynaBolt Plus range covers several diameters and lengths; this is the 10 x 50mm hex nut version.
The snap pack contains 2 anchors.



