Sold Out
Ramset

Ramset 10 x 75mm DynaBolt Plus Hex Nut Masonry Sleeve Anchor - 50 Pack, Gold Zinc

$53.46 $80.19 -33% OFF
You save: $26.73
Price reduced — was $80.19
✓ We'll notify you when this is back in stock!
Out of Stock
Qty:
14-Day Change-of-Mind Returns
Secure Checkout
Australian Stock
Dispatches within 1-2 business days Australia-wide delivery, typically 2-10 business days
Australian Stock Ships from AU warehouses
We accept:American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Frequently bought together

The Ramset 10 x 75mm DynaBolt Plus hex nut bolt is a masonry sleeve anchor supplied in a 50 pack. The longer 75mm length suits deeper fixings; as the nut is tightened the sleeve expands and grips the hole, and the fully assembled through-fixture design lets you drill through the fixture and set the anchor in one operation.

  • Fastener size: 10mm x 76mm
  • Head type: Hex nut
  • Fastener type: Masonry sleeve anchor
  • Material: Gold passivated, zinc plated, carbon steel
  • Finish: Gold
  • Drill size: 10mm
  • Pack quantity: 50
  • Packaging: Box

This pack suits repeat fixing of heavier brackets, frames and fittings to concrete, brick or block where a deeper anchor is needed. Drill a 10mm hole through the fixture into the masonry, insert the anchor and tighten the nut to expand the sleeve.

More about this product

Ramset 10 x 75mm DynaBolt Plus Hex Nut Bolt 50 Pack is a masonry anchor for use in concrete, brick or block. The fully assembled through-fixture design simplifies installation by removing the need to mark out and reposition.

  • Patented pull-down expansion sleeve closes gaps of up to 5mm
  • Fully assembled through-fixture anchor eliminates marking out and re-positioning
  • For use in concrete, brick and block
  • Gold passivated, zinc plated carbon steel
  • 10mm drill size, supplied as a 50 pack

Questions & Answers

How do I use a Ramset DynaBolt?

Drill a 10mm hole through the fixture into the masonry, insert the assembled anchor and tighten the nut so the sleeve expands and grips the hole.

What drill size does the 10mm DynaBolt need?

Use a 10mm masonry drill bit to match the anchor diameter.

What is the difference between this and the 10 x 50mm version?

This is the longer 75mm length for deeper fixings or thicker fixtures; the 50mm is a shorter alternative.

What materials can it be used in?

Concrete, brick and block.

How many anchors are in the pack?

This is a 50 pack, supplied in a box.

Standard Shipping Australia-wide
Dispatches within 1-2 business days from our Australian warehouses
14-Day Change-of-Mind Returns
Change of mind? Eligible products can be returned within 14 days of delivery if unopened, unused and in original packaging. Return postage and restocking fees may apply. This does not affect your Australian Consumer Law rights for faulty products.

You may also like