
Ramset
The Ramset 16 x 110mm DynaBolt Plus hex nut bolt is a heavy-gauge masonry sleeve anchor for secure, deep fixing into concrete, brick and block. The pull-down expansion sleeve grips the substrate as the hex nut is tightened to hold larger fixtures firmly.
One of the longer, larger Ramset DynaBolt sizes for thicker fixtures and heavier loads. This fully assembled through-fixture anchor lets you drill, insert and tighten in one pass for structural brackets, posts and heavy equipment.
Ramset 16 x 110mm DynaBolt Plus Hex Nut Bolt is a masonry sleeve anchor designed for use in concrete, brick or block applications, featuring a pull-down expansion sleeve. The fully assembled through-fixture anchor simplifies installation by eliminating the need for marking out and repositioning fixtures.
Drill a 16mm hole to suit the specified drill size.
The fastener measures 16mm x 110mm with a hex nut head.
Drill the hole, insert the assembled through-fixture anchor through your fixing, then tighten the hex nut to expand the sleeve into the masonry.
Gold passivated, zinc plated carbon steel.
Concrete, brick and block.
This is a single anchor.


