
Ramset
The Ramset 20 x 160mm DynaBolt Plus hex nut masonry anchor is a heavy-duty sleeve anchor for deep, secure fixing into concrete, brick and block. The pull-down expansion sleeve grips the substrate as the hex nut is tightened, holding large structural fixtures firmly.
One of the largest Ramset DynaBolt sizes for the heaviest loads. This fully assembled through-fixture anchor lets you drill, insert and tighten in one pass for structural steel, posts, machinery and heavy brackets fixed to masonry.
Ramset 20 x 160mm DynaBolt Plus Hex Nut Masonry Anchor is a masonry sleeve anchor designed for use in concrete, brick or block applications. It features a pull-down expansion sleeve, and the fully assembled through-fixture anchor simplifies installation by eliminating the need for marking out and repositioning fixtures.
Drill a 20mm hole to suit the specified drill size.
The fastener measures 20mm x 157mm with a hex nut head.
Drill the hole, insert the assembled through-fixture anchor through your fixing, then tighten the hex nut to expand the sleeve into the masonry.
Gold passivated, zinc plated carbon steel.
Concrete, brick and block.
This is a single anchor.


