
The Tradeflame 2.0mm x 1.5mm copper de-soldering wick makes solder removal quick and clean during electronics repair and rework. The flat copper braid draws molten solder up off the joint, leaving the pad and component leads tidy.
Heat the braid against the joint with your soldering iron and the solder wicks straight into the copper. Ideal for clearing through-holes, correcting bridged joints and reworking boards, with a spare length on hand thanks to the two-pack.
The Tradeflame 2.0mm x 1.5mm De-Soldering Wick 2 Pack is designed for efficient solder removal using a flat copper braid, suitable for electronics repair and prototyping. The Tradeflame De-Soldering Wick features a 2.0mm x 1.5mm flat copper braid that allows for precise de-soldering. It effectively removes solder, making it ideal for repair work. Supplied in a convenient 2 pack.
This is a 2 pack of de-soldering wick.
The flat copper braid measures 2.0mm wide by 1.5mm.
It is made from copper braid that draws molten solder away from the joint.
Place the braid over the solder you want to remove and press your hot soldering iron onto it; the solder melts and wicks up into the braid.
It is used for solder removal during electronics repair and rework.


