
The Trojan 13mm Combination Spanner puts a 12-point ring end and an open end on one chrome vanadium tool, both sized for 13mm fasteners. 13mm is one of the most-used sizes in the workshop, and a combination spanner lets you loosen with the ring then spin off with the open jaw.
Reach for this wherever a socket will not fit, such as inline bolts, brackets and engine-bay fasteners. The 12-point ring repositions every 30 degrees for confined spaces, and the polished chrome vanadium finish resists grease and wear.
The Trojan 13mm Combination Spanner is a durable tool for tightening and loosening fasteners with 13mm heads. Constructed from polished chrome vanadium.
A spanner with a closed ring end and an open-jaw end of the same size. This one is 13mm at both ends.
13mm hex nuts and bolt heads.
Loosen and final-tighten with the ring end, then use the open end to wind the nut on or off where the ring cannot pass.
It engages the nut every 30 degrees, letting you reposition in tighter spaces than a 6-point.
Polished chrome vanadium steel.



