
The Trojan 16mm Combination Spanner brings a 12-point ring end and an open end together on one chrome vanadium tool, both sized for 16mm fasteners. Loosen and final-tighten with the ring, then spin the nut off with the open jaw.
Reach for a combination spanner wherever a socket cannot fit, such as inline fittings, brackets and engine-bay bolts. The 12-point ring repositions every 30 degrees for confined spaces, and the polished chrome vanadium finish resists grease and wear.
The Trojan 16mm Combination Spanner is a durable tool for tightening and loosening fasteners with 16mm heads, suitable for DIY and professional settings. Constructed from polished chrome vanadium.
A spanner with a closed ring end and an open-jaw end of the same size. This one is 16mm at both ends.
16mm hex nuts and bolt heads.
Loosen and final-tighten with the ring end, then use the open end to wind the nut on or off where the ring cannot pass.
It engages the nut every 30 degrees, letting you reposition in tighter spaces than a 6-point.
Polished chrome vanadium steel.



