
The Trojan 20mm Combination Spanner combines a 12-point ring end and an open end on one chrome vanadium tool, both sized for 20mm fasteners. Loosen or final-tighten with the ring, then spin the nut off quickly with the open jaw.
A combination spanner is handy wherever a socket will not fit, such as inline fittings, plumbing and engine-bay work. The 12-point ring repositions every 30 degrees so you can keep working in confined spaces, and the polished chrome vanadium finish resists grease and wear.
The Trojan 20mm Combination Spanner is a durable tool for tightening and loosening fasteners with 20mm heads. Constructed from polished chrome vanadium, it suits both DIY and professional work.
A spanner with a closed ring end and an open-jaw end, both the same size. This one is 20mm at both ends.
20mm hex nuts and bolt heads.
Use the ring end to break the nut loose and final-tighten, then use the open end to wind it on or off where the ring cannot pass.
It engages the nut every 30 degrees, so you can reposition the spanner in tighter spaces than a 6-point allows.
Polished chrome vanadium steel.



