
Kincrome
The Trojan stud remover is built to extract and refit problem studs from 6mm to 19mm, driven by a standard 1/2" socket wrench for plenty of controlled torque.
Using a socket-driven action rather than locking pliers, the tool grips the stud body without chewing up the threads, so studs can be wound out and reused or replaced. The wide 6-19mm range covers a broad spread of automotive and workshop fasteners. A useful addition for engine, suspension and general repair work where seized or damaged studs need to come out cleanly.
The Trojan Stud Remover is a tool designed for the effective removal and tightening of problematic studs ranging from 6mm to 19mm.
Engineered to assist in removing and tightening studs that may be difficult to handle, it uses a 1/2" socket drive and accommodates a range of stud sizes between 6mm and 19mm. Constructed for durability and ease of use, it is suitable for both professional and DIY applications.
The Trojan stud remover is rated for studs from 6mm to 19mm in diameter.
It takes a 1/2" socket drive, so you operate it with a standard 1/2" ratchet or breaker bar.
It grips and turns a threaded stud so you can extract a seized or damaged stud and refit studs without damaging the threads.
Yes. It is constructed for durability and is suited to both professional workshops and home repair jobs.




