How to Clean a BBQ: Grills, Hotplates, Burners and Hoods

18-inch BBQ grill brush and scraper for cleaning grill plates

A clean barbecue cooks better, tastes better and lasts longer. Built-up grease can cause flare-ups, uneven heating and rust, and it's not pleasant to cook on. The good news is that a little care after each cook and a proper clean a few times a year keeps most barbecues in great shape. This guide explains how to clean a BBQ step by step.

What you'll need

  • A long-handled grill brush and scraper
  • A plastic or wooden scraper for hotplates
  • Heat-resistant gloves
  • Warm soapy water and a bucket
  • Non-scratch scourers and cloths
  • BBQ cleaning wipes or a barbecue cleaner suitable for your model
  • A small wire brush or pipe cleaner for burner ports
  • Paper towel or old rags
  • Cooking oil for re-seasoning

You'll find brushes, scrapers and cleaning products in our BBQ accessories range.

The quick after-cook clean

The easiest time to clean is straight after cooking while the barbecue is still warm.

  1. Turn the burners to high for a few minutes with the hood open to burn off food residue.
  2. Turn off the gas at the bottle and the burners.
  3. While the plates are warm (not scorching), scrape the hotplate and brush the grill.
  4. Wipe the plates with a damp cloth or paper towel, using long-handled tools and gloves.
  5. Lightly oil the cooking surfaces to help prevent rust.
  6. Empty or check the drip tray if it's getting full.

This routine takes only a few minutes and makes deep cleaning much easier.

How to deep clean a gas BBQ

Do a thorough clean at the start and end of the barbecue season, or more often if you cook frequently.

Step 1: Safety first

Make sure the barbecue is completely cool. Turn off the gas at the bottle and disconnect it. Work outside in a well-ventilated area.

Step 2: Remove and soak the plates

Remove the grill plates and hotplates. Soak them in warm soapy water to soften grease, then scrub with a non-scratch scourer. Check the manufacturer's guidance first, because enamel-coated, cast iron and stainless steel plates each need slightly different care. Avoid harsh abrasives on enamel.

Step 3: Clean the burners

Lift out flame tamers or heat shields and clean them in soapy water. Inspect the burners for blockages, rust or damage. Use a soft wire brush along the burner and clear blocked ports with a pipe cleaner or thin wire. Don't enlarge the holes. Check venturi tubes for spider webs or insect nests, which are a common cause of uneven flames.

Step 4: Clean the firebox and drip tray

Scrape loose debris from the inside of the firebox into the drip tray. Remove the drip tray, empty it and wash it, or replace a disposable liner. Absorbent fat-catcher material and foil liners make future clean-ups faster.

Step 5: Clean the hood

Grease and smoke build up inside the hood. Wipe the inside with warm soapy water or a barbecue degreaser suitable for the surface, then rinse with a damp cloth. Flaking black patches inside the hood are often carbon build-up, which can be gently scraped off.

Step 6: Clean the exterior

Wipe the outside with a soft cloth and warm soapy water. Use a stainless steel cleaner on stainless surfaces, wiping in the direction of the grain. Clean knobs and side shelves, and check the hose and regulator for cracks or damage while you're there.

Step 7: Reassemble, season and test

Dry all parts thoroughly to prevent rust, then reassemble. Lightly oil the cooking plates and heat the barbecue for a short time to season them. Check that all burners light properly and the flames are even.

Checking for gas leaks

After reconnecting the gas bottle, brush a solution of soapy water over the connections and hose. If bubbles appear, there's a leak. Turn off the gas, tighten the connection and test again. If the leak continues, don't use the barbecue until the part is replaced. Replacement hoses, regulators and burners can be found in our BBQ replacement parts range.

Cleaning different plate materials

Plate type Cleaning tips
Cast iron Scrape and brush while warm; dry well and oil to prevent rust
Enamel-coated Use non-abrasive scourers; avoid metal scrapers that can chip the coating
Stainless steel Scrub with a brush or non-scratch pad; stainless cleaner for the exterior

Natural cleaning options

For light grime, a paste of bicarb soda and water can help lift grease from plates, and white vinegar diluted with water can cut through residue on exteriors. Rinse well afterwards. Our vinegar and bicarb cleaning guide has more ideas, and our essential cleaning kit covers the basics to keep on hand.

Protecting your BBQ between cooks

  • Use a fitted cover to protect it from rain, dust and leaves. Browse our BBQ covers.
  • Keep it in a sheltered spot if possible, especially near the coast where salt air speeds up corrosion.
  • Store the gas bottle upright, outdoors and in a well-ventilated area.
  • Check for insects and nests if the barbecue hasn't been used for a while.

Cleaning a pizza oven or charcoal grill

Charcoal grills need ash emptied once cool, and grates brushed while warm. Pizza oven stones should be brushed rather than washed. Our pizza oven buying guide covers pizza oven care.

When to replace parts

Replace burners that are rusted through, cracked or producing uneven, yellow or lazy flames after cleaning. Replace hoses that are cracked or brittle. Warped plates or flaking enamel are also signs it's time for new parts. If your barbecue is past its best, our BBQ buying guide and BBQs and outdoor grills range can help you choose a replacement. Every brand we stock is listed on our brands page.

Related guides: BBQ Buying Guide, Pizza Oven Buying Guide, The 10-Product Cleaning Kit That Handles Every Mess, Cleaning With Vinegar and Bicarb.

Frequently asked questions

How often should I clean my BBQ?

Do a quick clean after every cook and a deep clean at least at the start and end of the barbecue season, or more often if you cook frequently.

Should I clean BBQ plates hot or cold?

Scrape and brush plates while warm, not scorching, as residue comes off more easily. For deep cleaning, let the barbecue cool completely first.

Can I use oven cleaner on my BBQ?

Check the manufacturer's instructions first. Some cleaners can damage enamel, aluminium or painted surfaces. A barbecue-specific cleaner is usually safer.

Why are my BBQ flames yellow or uneven?

Blocked burner ports or venturi tubes, often from grease or insects, are common causes. Clean the burners and check the gas connection.

Keep reading

Yoga Mat Buying Guide: Thickness, Grip and Material Tool Box Buying Guide: Chests, Cases and Trolleys Toaster and Sandwich Press Guide: Which Suits Your Kitchen?